Assembly of Upper Handles to Lower Handles
E1 |
E2 |
E3 |
x3 |
1.Insert the Barrel Nut into the Cam Lock as illustrated in fig E1.
2.Attach the Upper Handle to the Lower Handle with the Round Headed Bolt, Washer and Cam Lock as
illustrated in fig E2
3.Turn the Cam Lock 3 times clockwise, as illustrated in fig E3.
E4 |
E5 |
E6
4.Fold down the Cam Lock towards the Handle as illustrated in fig E4, and continue to turn clockwise (E5) until tightened.
5. The Cam Lock can be unlocked and locked as illustrated in fig E6.
Repeat for the other side.
F1 | Grassbox Assembly | |||
F2 |
| G1 | ||
Grassbox Handle Assembly | G2 |
| ||
1. | Locate the grassbox handle into the slots in the grassbox |
|
| |
2. | upper and push until it clicks into position. (F1) |
|
| |
Looking at the underside of the lid (F2), ensure the |
|
| ||
| clips of the grassbox handle are securely located. |
|
| |
Grassbox Assembly |
|
| ||
1. | Locate the the grassbox halves together by aligning the |
|
| |
| clips | Ensure all clips are correctly located before clicking |
|
|
2. | into position. (G1) |
|
| |
Locate the grassbox lid onto the assemble grassbox by |
|
| ||
| aligning the clips. Ensure all clips are correctly located | H |
| |
| before clicking into position (G2) | 1 | ||
Fitting Fully Assembled Grassbox to Lawnmower. | ||||
1. | Lift safety flap (H1) |
|
| |
2. | Make sure the discharge chute is clean and free from |
|
| |
3. | debris (H2) |
|
| |
Locate fully assembled grassbox onto 2 location points |
| 3 | ||
4. | (H3) at the rear of the deck as illustrated in pic. J |
| ||
Locate safety flap onto the top of the grassbox. Ensure |
|
| ||
• | the grassbox is securely located. |
|
| |
IMPORTANT ! AFTER FITTING ENSURE NO GAP |
| 2 | ||
| REMAINS BETWEEN THE SAFETY FLAP AND THE | J | ||
• | GRASSBOX. |
| ||
Removal is the reverse procedure. |
| |||
• | For larger areas of grass where grass collection is not |
|
| |
| required you can use your lawnmower without the |
|
| |
| grassbox. The design of the safety flap permits the cut |
|
| |
| grass to be discharged downward behind the machine. |
|
|
PAGE 6