Flymo 360XC, 420XC, 340XC manual Cables, Important Information, Roller Assembly, Page

	Cables
CABLES - IMPORTANT		1. No earth required. Flymo products are double
•	Use only 1.00mm2 size cable up to 40 metres	insulated to EN60335 and under no
	length maximum.	circumstances should an earth be connected to
Maximum rating :		any part of the product.
1.00mm2 size cable, 10 amps 250 volts AC.		2. Ensure the mains voltage suits your product
•	YOUR PRODUCT IS SUPPLIED WITH AN	3. IMPORTANT!
	ELECTRIC MAINS CABLE FITTED WITH A FEMALE	The wires in the mains lead are coloured in
1.	CONNECTOR.	accordance with the following code:
	Flymo Mains Cables and Extension Cables are	BLUE	-	NEUTRAL
	available from your local Approved Service	BROWN	-	LIVE
2.	Centre.	The wire which is coloured BLUE must be
	Do not wire an extension cable directly to your	connected to the Terminal which is marked with
	product yourself. Please contact your local	the letter 'N' or coloured BLACK.
	Approved Service Centre for further information	The wire which is coloured BROWN must be
3.	on the connectors and kits available.	connected to the Terminal which is marked with
	Only use extension cables specifically designed	the letter 'L' or coloured RED.
	for outdoor use.	4. It is important that the outer sheath is clamped
CONNECTORS - IMPORTANT		correctly into the 3-pin plug.
•	Flymo connectors are suitable for use with 2 core	5. If in doubt consult your local Service Repairer or
	cable only. Under no circumstances should these	qualified electrician before the machine is used.
•	connectors be used for earthed products.	6. A 13 Amp fuse must be fitted to the Mains Plug.
	All Flymo connectors and cables are of	7. The normal plug fuse and household fuse only
	splashproof construction. They are not waterproof	protect the electrical equipment and are not a
	and must not be left outside permanently nor	safeguard against electrocution.
	should they be submerged or immersed in water.
	Do not let cable lay or trail through pools of water
	or splashed with water from hose pipes.
MAINS PLUG REPLACEMENT - IMPORTANT
•	If the plug supplied is cut off it should be
	destroyed. There is an electric shock hazard if a
	cut off plug is inserted into a 13 amp socket.

IMPORTANT INFORMATION

A

When received from the Manufacturer, the wheels are in a raised position.

Do not switch on the product before removing from the raised position into position 5.

Roller Assembly

B1

B2

1.Turn product over.

2.Place both halves of the roller over the location pegs as illustrated in fig.B1

3.Clip the roller together to secure it into position.(B2)

• Do not clip the roller together before placing over the location pegs

PAGE 4