Easi-Reel Cable Winder (XC models only)

Easi-Reel Cable Winder (XC models only)

Y1

Y3

Y2

Y4

Storing your cable in the Easi-Reel cable winder

1.Insert the female connector into the centre of the cable winder (Y1)

2.Place the cable under the cable guide (Y2)

3.Turn the cable winder (Y3) until all of the cable is wound in.(Y4)

Unwinding the cable before re-use

1.Pull the cable by the plug and unwind the cable fully.

• Ensure that the cable is released from the cable guide (Y2) before using your machine.

• Ensure cable is not entangled with any other cables and that it is not trapped in any parts of the product.

Fault Finding Hints

Fails to Operate

1.Is the correct Starting procedure being followed? See ‘To Start your Lawnmower’

2.Is the Power Turned On?

3.Check the fuse in the plug, if blown replace.

4.Fuse continues to blow?

Immediately disconnect from the mains electricity supply

and consult your local approved Service Centre. Poor Grass Collection

1.Disconnect from the mains electricity supply.

2.Clean the outside of the air intakes, the discharge chute and the underside of the deck.

3.Raise to a higher height of cut. See Cutting Height Adjustment.

4.If poor collection persists.

Immediately disconnect from the mains electricity supply and consult your local approved Service Centre.

Excessive Vibration

1.Disconnect from the mains electricity supply.

2.Check that the blade is fitted correctly?

3.If the blade is damaged or worn, replace it with a new one.

4.If vibration persists?

Immediately disconnect from the mains electricity supply and consult your local approved Service Centre.

Lawnmower becomes heavy to push

1.Disconnect from the mains electricity supply.

2.In long grass or uneven ground, the height of cut should be raised to a higher position. See Cutting Height Adjustment.

3.Check that the wheels and rollers can rotate freely.

4.If problem persists?

Immediately disconnect from the mains electricity supply and consult your local approved Service Centre.

Service Recommendations

1.We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.

2.Always use genuine Spare Parts.

3.Prepacked spares are available from most Husqvarna Outdoor Products stockists.

4.Your product is uniquely identified by a silver and black product rating label

5.If you have a problem with your machine contact your local Approved Service Centre ensuring you have full details of your product as described on the product rating label.

6.Should it be necessary for work to be carried out by

your Service Centre, it is important to take your complete machine including cable and any extension cables used.

A network of specialist dealers can be found in your local Yellow Pages. To obtain service on your product simply telephone or visit your local Service Centre. Should you require service under the terms of our guarantee the Service Centre will require proof of purchase.

All of the centres listed stock genuine Spare Parts. NOTE: Our Service Repairers act on their own behalf and are not empowered to commit or legally bind Husqvarna UK Ltd. in any manner whatsoever.

Environmental Information

Husqvarna UK Ltd. products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life.

Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.

Awareness of the environment must be considered when disposing of ‘end-of-life’ product.

If necessary, contact your local authority for disposal information.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council office, your household waste disposal service or the shop where you purchased the product.

PAGE 10

Page 11
Image 11
Flymo 360 Easi-Reel Cable Winder XC models only, Fault Finding Hints, Service Recommendations, Environmental Information

340XC, 420XC, 420, 360, 360XC specifications

The Flymo EASICUT 500 and EASICUT 420 are innovative cordless electric hedge trimmers designed for maintenance and care of hedges and shrubs in residential gardens. These models are recognized for their efficiency, maneuverability, and user-friendly features, making garden upkeep a less daunting task.

One of the standout features of the Flymo EASICUT 500 and EASICUT 420 is the lightweight design, allowing users to handle the trimmers with ease even during extended periods of use. Weighing significantly less than many traditional hedge trimmers, both models provide comfort and reduced fatigue, making them ideal for both professional landscapers and home gardeners.

Both trimmers are equipped with laser-cut precision blades, which ensure a clean and smooth cut. This not only enhances the appearance of hedges and shrubs but also promotes healthier plant growth by preventing jagged edges. The EASICUT 500 boasts a blade length of 50 cm, while the EASICUT 420 has a slightly shorter 42 cm blade, catering to different garden sizes and trimming requirements.

The trimmers feature ergonomic handles designed for optimal grip and control. This thoughtful design reduces the likelihood of strain and discomfort during operation. Furthermore, they include a safety switch that ensures the device only operates when intended, enhancing user safety.

Powering the Flymo EASICUT series is an efficient battery system that delivers impressive run time with a quick charging capability. This cordless technology frees users from the hassle of tangled cords, allowing for unrestricted movement around the garden. The EASICUT series also has a low noise operation, making it perfect for use in residential areas without disturbing neighbors.

Additionally, the EASICUT models are designed with a protective blade guard, ensuring safe storage and transportation. This feature further extends the longevity of the blades by preventing accidental damage.

Overall, the Flymo EASICUT 500 and EASICUT 420 are excellent choices for those seeking efficient, lightweight, and user-friendly hedge trimmers. With their advanced technology, safety features, and precision cutting capabilities, these trimmers are well-suited to help you maintain a beautiful and healthy garden with ease.