Caring for your Lawnmower
Z1 |
Z3 |
Z5 |
Z7 |
Z2 |
Z4 |
Z6 |
Z8 |
Cleaning
•USE GLOVES
•IMPORTANT:- It is very important that you keep your lawnmower clean. Grass clippings left in any of the air intakes or under the deck could become a potential fire hazard.
1.Remove grass from under the deck with brush. (Z1)
2.Using a soft brush - remove grass clippings from all air intakes (Z2), the discharge chute (Z3) and the grass box (Z4).
3.Using a soft brush, remove grass clippings from the vision window (Z5).
4.Wipe over the surface of your lawnmower with a dry cloth (Z6).
•IMPORTANT:- Never use water for cleaning your lawnmower. Do not clean with chemicals, including petrol, or solvents - some can destroy critical plastic parts.
Z9 |
Cleaning | Z10 |
| |
1. | Lift grassbox lid, squeeze together the two catches |
| |
2. | (Z7) and remove the cable spool. |
|
|
Clean the cable spool (Z8) and the area it was located |
|
| |
3. | with a soft brush (Z9) |
|
|
Replace the cable spool, ensuring it clicks into place. |
|
| |
Storing your Lawnmower: |
|
| |
• | Loosen the wing knobs to enable the handles to be |
|
|
• | folded over the product (Z10). |
|
|
Store in a dry place where your lawnmower is |
|
| |
| protected from damage |
|
|
At the End of the Mowing Season |
|
| |
1. | Replace blade, bolts, nuts or screws, if necessary. |
|
|
2. | Clean your lawnmower thoroughly. |
|
|
3. | Make sure that the electric cable is stored correctly to |
|
|
| prevent damage. |
|
|
Replacement Parts
Blade | Reference no.: | FLY062 | Part no.: | 521947390 |
340XC | ||||
360/360XC | Reference no.: | FLY059 | Part no.: | 505492090 |
420/420XC |
|
| Part no.: |
PAGE 9
