5 Attach the Glass Shelf.

If you attach the Home Theatre System to the Stand, attach the Speaker Hooks first. (Refer to “Installing the Center Speaker (For Home Theatre Systems only)” on page 11.)

1Fully insert the Glass Shelf until it touches the Rear Pillar.

Caution label

Glass Shelf

*The swivel function allows you to adjust the viewing angle of the TV (left and right).

Screw

Rear holes

(+K4 × 20)

+

 

Sleeve

 

Front holes

Note

2 Paste the supplied paper

Attach the Glass Shelf to the TV Stand with the Caution label

facing up on the front right, as shown in the illustration.

template on the Top Board.

2 Tighten the four screws on the Side Pillars to secure

1 Choose the supplied paper template and align the

right corner edges of the paper template with the

the Glass Shelf to the TV Stand.

right corner of the Top Board.

 

 

For models that are not specified on page 2:

 

Be sure to refer to the leaflet supplied with your TV,

 

choose the paper template corresponding to your

 

TV.

 

For models that are specified on page 2:

 

Choose the paper template in black print

 

corresponding to your TV screen size.

 

2 Tape the paper template to the Top Board with the

 

supplied tape.

Step 3: Preparing for the installation of the TV

Tape

Paper template

1 Attach the sleeves to the Top Board.

Attach the sleeves with the supplied screws (+K4 × 20).

For models that are not specified on page 2:

Use the front holes.

For models that are specified on page 2:

For swivel models*, use the rear holes; for non-swivel models, use the front holes.

Note

Check your TV’s operating instructions as to whether or not your TV can swivel.

8 (GB)