Sony SU-FL300L Step 4:, Installing the TV, 3 Attach the anchor bolts, 2 Install the TV onto the TV Stand

Step 4:Installing the TV

Attach your TV to the Table-Top Stand if it is not already attached.

Only for the specified swivel models on page 2, follow the procedure part 1 of Step 4.

1 Adjust the position of the swivel plate to the center (For swivel models only).

Before installing the TV, align the tab of the swivel plate with the notch in the Table-Top Stand.

Swivel plate

Tab

For swivel models only

WARNING

If the swivel plate is not adjusted correctly, the TV will not be installed securely and it may fall.

2 Install the TV onto the TV Stand.

1Match the outline of the Table-Top Stand to the outline of the TV screen size and corner marks on the paper template, so that the holes at the bottom of the Table-Top Stand align to the sleeves which were attached in part 1 of Step 3.

2Slide the TV back to lock into place.

3Remove the paper template from the Top Board.

Paper template

Only for the specified swivel models on page 2

AThe white corner mark is for swivel models. B The black corner mark is for non-swivel models.

Note

For 37/40 inch users, whether the TV is swivel model or not, align the Table-Top Stand with the black corner mark. (There is no white corner mark on the paper template for 37/40 inch.)

3 Attach the anchor bolts.

Secure the two supplied anchor bolts to the rear of the TV.

Anchor bolt

Note

If the two anchor bolts are not used to secure the TV, it may fall and cause injury.

9 (GB)