Step 3: Install the Display Unit |
|
|
For Sony Dealers |
| |
|
|
|
WARNING
Be sure to complete the installation before connecting the Power Cord to the wall outlet. If you allow the Power Cord to be pinched under or between pieces of equipment, this may result in a short circuit or an electric shock. If you stumble over the Power Cord or the Display Interface Cable, the stand may topple over, and this may result in injury.
1 Install the Display Unit on the Tabletop Stand.
1Connect the Power Cord and the Display Interface cable to the Display Unit.
Tip
See the instruction manual of the Sony Flat Panel Color Television
1
Rear side of the Display Unit
Power Cord
Display Interface
Cable
Soft rag such as a blanket
2Be sure that two or more persons hold the right and left edges of the top and the under sides of the Display Unit while fitting the hooks on the rear of the Display Unit into the holes on the fixtures of the stand. Then confirm that the hooks on the rear of the Display Unit are completely inserted into the four holes of the fixtures.
Note | 2 |
Do not stumble over the Power Cord or the Display Interface Cable.
Rear side of the Display Unit
6 (US)