JVC DLA-SH4K Setting Value Description Power, Latest Error, Signal Status, RateHz, Pixel H, Link

Item	Setting Value	Description
Power	ON	For turning the power ON/OFF.
	OFF	ON : Turns on the power.
		OFF : Turns off the power.

		NOTE:
		● The following operating modes of the projector are displayed to the
		right of the OFF button.
		STANDBY		: Standby (OFF)
		PROJECTION		: Lamp Illuminated (ON)
		FAN ENABLE		: FAN Enable (OFFON)
		LAMP ENABLE		: LAMP Enable (OFFON)
		DEVICE ENABLE		: Elemental Device Enable (OFFON)
		COOLING		: Cooling (OFF)
		EMERGENCY		: Error Occurred (Cooling not performed)
		EMERGENCY COOLING : Error Occurred (Cooling performed)
		● When in the standby mode, clicking the ON button each time
		switches the mode in the sequence of STANDBYDEVICE
		ENABLELAMP ENABLEFAN ENABLEPROJECTION.
		● Clicking the OFF button when the power is on switches the projector
		to the cooling mode. The power of the projector cannot be turned on
		during the cooling process (180 seconds).
Latest Error	—	Displays the latest error number. Refer to ALatest ErrorB for information
		on the error number and details. (A Page 42)
Signal Status		Displays information on the input signals.
DVI	—	DVI	: Displays the input terminal number.
Rate(Hz)	—	Rate(Hz)	: Displays the vertical frequency.
Pixel H	—	Pixel H	: Displays the horizontal resolution.
Pixel V	—	Pixel V	: Displays the vertical resolution.
Link	—	Link	: Displays the link status of the DVI terminal.
Temperature		Displays the interior temperature of the projector.
Temp. 1	—	Temp. 1	: External Temperature
Temp. 2	—	Temp. 2	: Internal Temperature
Projector Usage		Displays the time interval during which the lamp is in use.
Reset	—	CAUTION:

●Do not click on AResetB unless the lamp is replaced.

25