Setup
Installation (Cont’d)
Projector Installation
You can install this projector between 90 .
Images will be properly displayed if the horizontal angle is between the range of 5 .
90
90
5 | 5 |
CAUTION:
●To
●The projector cannot be installed upside down.
Adjusting the Inclination
Adjust the horizontal angle of the projector.
Lift the projector and turn the nut of the adjustable foot with a spanner in the direction indicated by the arrow to extend or retract the foot. The adjustable range is 20 mm.
Extend Retract
Installing the Projector and Screen
It is recommended that this projector be installed at right angle to the screen.
You can shift the projection screen position vertically between 0 % to ±50 %, and horizontally between 0 % to ±25 %. (Lens shift feature)
When shift amount in the upward direction is +50 %
Install the projector such that the lower end of the projection screen is at the same height as the center of the lens.
Screen
90 90 90
Center Line of Lens
When shift amount in the upward/downward direction is 0 %
Install the projector such that the center of the projection screen is at the same height as the center of the lens.
Screen
90 90 90
Center Line of Lens
When shift amount in the downward direction is –50 %
Install the projector such that the upper end of the projection screen is at the same height as the center of the lens.
Screen |
| Center Line of Lens |
|
| |
90 | 90 | 90 |
12
