Sony SU-WL100 Adjusting the position of the holders of the Base Plate, Deciding on the installation location, Step 2:, Step 3:

Step 2:

Adjusting the position of the holders of the Base Plate

1
	TV screen size	Procedure
	26 inch	This procedure is not necessary.
	20 inch	Follow this procedure.
	Other	Refer to the leaflet supplied
		with your TV.

1Remove the screws that secure the left and right holders to the Base Plate and move the holders to the inner position.

2Firmly secure each holder using the screws removed in the previous procedure 1.

Holder

Notes

•When using an electric screwdriver, set the torque setting to approximately 1.5 N·m {15 kgf·cm}.

•Make sure that the four screws that secure the Base Plate and the holders are securely tightened.

Step 3:

Deciding on the installation location

1 Referring to the TV installation dimensions table on page 12, decide on the installation location.

Allow for suitable clearance between the TV and the ceiling and protruding parts of the wall as shown below.

Unit: mm (inches)

	)
	8
300	(11 7/

100	100
(4)	(4)
100	(4)

Never install the TV set as shown below:

Air circulation is blocked.

Wall

Note

If you intend to route the cables in the wall, make a hole in the wall to insert the cables before beginning the installation.

6 (GB)