Step 5: Preparing for the installation of the TV

If you intend to install a TV that is not specified on page 2, be sure to refer to the leaflet “Installing the Wall-Mount Bracket” supplied with your TV.

1 Remove the screws from the rear of the TV. Then detach the Table- Top Stand from the TV.

Place the TV with its screen facing down on a stable cloth-covered work surface.

For the following TV users:

KDL-26S30xx */KLV-26V300A

Soft cloth

*In the actual model names, the “xx” indicates numbers and/or characters specific to each model.

Notes

•When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV.

•To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.

CAUTION

•If pressure or shock is applied to the surface of the TV, the LCD display may break or become damaged.

•Lay the display face down on a stable and level surface with the Table-Top Stand hanging over the edge of the surface. Having the display face and the base of the Table-Top Stand on the same level surface will create an unstable working condition and can damage the TV.

•When detaching the Table-Top Stand from the TV, hold the Table-Top Stand securely with both hands.

When using an electric screwdriver, set the torque setting to approximately 1.5 N·m {15 kgf·cm}.

Do not lift the Mounting Hook before the screws (two screws each for left/right) are secured. This may distort the Mounting Hook or the TV cabinet.

2 Secure the Mounting Hook from the left side of the rear of the TV.

1Secure the Mounting Hook to the rear of the TV temporarily, using the supplied two screws (+PSW4

× 12).

2Be sure that both screws are tightened securely with equal torque strength to the rear of the TV.

Screw (+PSW4 × 12)

Mounting

Hook

Soft cloth

Notes

•If you install the right Mounting Hook first, it will be difficult to adjust its angle. Install the left Mounting Hook first.

•Be sure not to use any screws other than the supplied ones (+PSW4 × 12) when securing the Mounting Hook.

8 (GB)