Sony SU-WL100 Hook, right side of rear of the TV, 4 Secure the Mounting Hook to the, 3 Adjust the angle of the Mounting

3 Adjust the angle of the Mounting	4 Secure the Mounting Hook to the
Hook.	right side of rear of the TV.

When installing the TV parallel to the wall (0 degrees), adjustment of the Mounting Hook angle (procedures

1and 2 below) is not necessary.

1Remove the angle adjusting screw from the arm of the Mounting Hook. Choose the holes corresponding to the desired angle (5, 10, 15 or 20

degrees).

2Firmly secure the arm using the screw removed in the previous procedure 1.

1Secure the Mounting Hook to the rear of the TV temporarily, using the supplied two screws (+PSW4

× 12).

2Be sure that both screws are tightened securely with equal torque strength to the rear of the TV.

If you adjusted the left angle of the Mounting Hook, also perform the same adjustment as in 3 of Step 5 “Adjust the angle of the Mounting Hook” for the right.

Mounting Hook

Screw

(+PSW4 × 12)

Mounting Hook

Arm

1

2

Notes

• Be sure to adjust the right and left arms to the same angle.

• Make sure that the two arm bases are screwed in securely.

CAUTION

Be careful not to pinch your fingers when adjusting the angle of the Mounting Hook.

9 (GB)