Calling

Before you can make or receive any calls, you must turn on the phone and be within range of a network. See “Making and receiving calls” on page 5.

Making calls

1.Enter the area code and the phone number.

2.Press YES to make the call.

3.Press NO to end the call.

Tip: You can call numbers from the call list and the phone book. See “Call list” on page 27 and “Phone book” on page 27.

To change the earpiece volume during a call

•Slide the volume key on the side of the phone up or down to increase or decrease the earpiece volume.

To turn off the microphone during a call

•Press and hold until the display shows Muted.

Press again to resume the conversation.

Note: The microphone must be turned on to change the earpiece volume during a call.

Automatic re-dialling

If the connection of the call failed and the display shows Retry?, press YES.

Note: Do not hold the phone to your ear while waiting. When the call is connected, the phone gives a loud signal.

The phone re-dials the number (up to ten times) or until:

•The call is connected.

•You press a key or receive a call.

Note: Automatic re-dialling is not available for data calls.

Making international calls

1.Press and hold until a + sign appears in the display.

The + replaces the international prefix number of the country from which you are calling.

2.Enter the country code, area code (without the leading zero) and phone number, YES.

Calling 25

This is the Internet version of the user's guide. © Print only for private use.