To edit a data account

1.Scroll to Connect, YES, Data comm., YES, Data accounts, YES.

2.Select a data account, YES.

3.Select Edit.

4.Select the setting you want to edit, YES. Edit the setting, YES.

5.Repeat step 4 for other settings you want to edit.

More settings information

To use the WAP browser, via a WAP service provider, you need settings for:

•a specific data account for WAP, and a WAP profile.

To use e-mail messaging, via an Internet service provider, you need settings for:

•a specific data account for e-mail, and an e-mail account.

To send a text message to an e-mail address via your network operator, you need to set:

•an e-mail gateway phone number.

44 Setting up WAP and e-mail

Descriptions

Adata account includes connection settings for access to an Internet server at your service provider.

AWAP profile includes user settings that allow browsing and multimedia messaging.

An e-mail account includes user settings that allow e-mail messaging direct from your phone, such as those provided by your Internet service provider. Alternatively, E-mail via WAP includes user settings that also allow e-mail messaging, such as those provided by your Internet service provider. However this is set up on your service provider’s WAP site.

Note: Check with your WAP service provider if their site supports e-mail.

WAP profile

The WAP settings are stored in a WAP profile. In most cases, you only need to use one profile to access the Internet.

You can set up and use additional WAP profiles, for example, when accessing secure Internet sites, such as a banking site or a corporate intranet. You then simply switch between profiles when you need to change the network connection. See “To set up with the wizard” on page 42 for more information.

This is the Internet version of the user's guide. © Print only for private use.