Playing a tape (continued)

Tips

When you press `/1(power) on the tape deck, only the tape deck turns on. Press `/1(power) on the DHC-MD373/333 to turn on the DHC-MD373/333 component system.

The cassette indicator lights up in red when a cassette is inserted and goes off when no cassette is inserted.

Pressing Hor hwhen the tape deck is off automatically turns on the tape deck and starts playing a tape if there is a cassette inserted (One Touch Play) (DHC-MD333 only).

Inserting the tape when the power is off automatically turns on the tape deck only. Press `/1(power) on the DHC-MD373/333 to turn on the DHC-MD373/333 component system.

You can switch from another source to the tape deck just by pressing Hor h(Automatic Source Selection).

To start playing automatically from the beginning of the tape after fast winding (Auto Play), press Hwhile holding down m(for the top side) or press hwhile holding down M(for the bottom side).

To listen to a tape recorded with the Dolby noise reduction system, set DOLBY NR to ON.

Using the timer function on the DHC-MD373/333, you can wake up to music at a preset time. For details, refer to “Wake up to music” in the DHC- MD373/333 component system Instruction Manual. When you set the Wake-up timer, DOLBY NR must be set on the tape deck.

Note

The AMS feature may not work in the following cases:

the blank space between tracks is four seconds or less.

the sound source recorded on the right channel is different from that on the left channel as with a KARAOKE tape.

low volume or low sound continues for a long time.

the TV is too close to the tape deck.

Recording a CD

— CD Synchro Recording

The CD SYNC button lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tape, since the tape deck automatically detects the tape type.

Tape deck TC-TX373

2 H 6

DOLBY NR*4 Cassetteindicator 5 h x

*This tape deck is equipped with the Dolby B-type noise reduction system.

The remote supplied with the

DHC-MD373

`/1

1

mM

. >

H

X x x

10