Sony TC-TX373 Connection to the DHC-MD333, *AlA, **BlB, Hooking up the system (continued)

Hooking up the system (continued)

Connection to the DHC-MD333

4(DHC-MD333 only)

Firmly connect the AU BUS connecting

cable to the AU BUS jack on the

5Connect A to A, and Bto Busing the audio connecting cords. Insert the plugs into jacks of the same colour.

The two audio connecting cords are the same, so you can connect A or Busing either cord.

TC-TX373 rear panel

DHC-MD333.

L

R

TAPE

IN OUT

A B

A

B

DHC-MD333

TC-TX373

A

B

A B

DHC-MD373 rear panel TC-TX373 rear panel

Insert the connector firmly all the way.

L

R

TAPE

IN OUT

Note

The AU BUS connecting cable is used for exchanging signals between the tape deck and the DHC-MD333. If you do not connect the cable firmly, the tape deck and DHC-MD333 may not operate correctly.

A B

A B

DHC-MD333 rear panel

L: sound flow

*AlA

The sound signals of the CD, MD and TUNER flow through the DHC-MD373/333 to the tape deck when you record to tape.

**BlB

The sound signal of the tape deck flows to the DHC-MD373/333 when you play a tape.

6