Indicator flashes quickly: Pairing in process

Indicator flashes (at about1-second interval) when responding to the Bluetooth receiving device: Connectable

(Paring successful)

Indicator flashes (at about 5-second intervals): Connected

Notes

“Pairing in process” of this unit is released after about 5 minutes. If pairing is not established within about 5 minutes, repeat the above procedure from step 4. iPod backlight may turn on in this 5 minutes.

To enter “Pairing in process,” you need to turn off the power of this unit first.

When not completed pairingRepeat the procedure from step 2.To quit “Pairing in process”

Press and hold the power button of this unit for about 1 second to turn off this unit.

Tip

When paring this unit with a number of Bluetooth receiving devices, repeat steps 3 to 5 for each device individually.

Note

For using the Bluetooth function, it is required that the Bluetooth device on the other side is corresponding with the same profile as this unit. However, even if it is corresponding with the same profile, functions may differ depending on the specification of the Bluetooth device.

12GB