Symptom

Cause / Remedy

 

 

Distorted soundTurn down the volume of the Bluetooth receiving

 

device to the point where the sound is no longer

 

distorted. For details on volume adjustment, refer

 

to the operating instructions supplied with the

 

Bluetooth receiving device.

 

Turn off the EQ of iPod.

 

Ensure that this unit is not receiving interference

 

from a wireless LAN, other 2.4 GHz wireless device,

 

or microwave oven.
Sound break, noise or playback speed change

If a device that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device(s), or a microwave oven is nearby, move away from such sources.

Remove any obstacle between this unit and other Bluetooth device or move away from the obstacle.

Locate this unit and other Bluetooth device(s) as near as possible.Re-position or re-orient this unit.Re-position or re-orient other Bluetooth device.
Pairing cannot be

Locate this unit and other Bluetooth device(s) as

established.near as possible.

 

Check if you input correct passcode (page 11).

Bluetooth connection cannot be established with a device that has been “paired” before.

Locate this unit and other Bluetooth device(s) as near as possible.

This unit tries to connect with either of the last two devices recognized before. If this unit cannot establish the Bluetooth connection with a paired device, operate the connecting procedures on the Bluetooth receiving device or pair the device again.

Pairing information may be deleted. Pair the device again.
20GB