TrackSnap Manual
LANC Video Delay Setting
Switches 8 and 9 sets up the recording time for your LANC camcorder.
Recording Time
30 Seconds - Continuous recording as long as motion is present.
1Minute 2.5 Minutes 5 Minutes
Green PIR LED Setting
Switches 10 controls the green PIR LED.
Model
| Switch 8 | Switch 9 |
| Down/Off | Down/Off |
| Down/Off | Up/On |
| Up/On | Down/Off |
| Up/On | Up/On |
PIR Delay
LED Off
LED On
Switch 10
Down/Off
Up/On
Motion Sensor Control board Specifications
Board Operating Conditions Operating Voltage: 5V - 14V DC
Recommended Operating Temperatures: 48.8°C to
Battery Life: ~9 months on An Alkaline 9V. Actual times depend on operating temperature.
Board Dimension
31.75mm X 81.28mm
User Feedback
Red (Super Bright) control LED: Displays board functions
Green PIR LED: Displays PIR triggers
Sensors
PIR Sensor: Pryoelectric Infrared motion sensor. Detection range out to 24.4 Metres depending on temperature.
CDS Photo Sensor: Detects light/dark for day/night operation.
Interface Ports
Sony/Canon LANC Port
Sony ACC Terminal Port
Hardwire Camera Control - Shutter, Refresh, Power On/Off
DC Power Port
External Light Port
User Interfaces
10 Position DIP Switch: Adjust board operating settings
Single Turn PIR Sensitivity POT: Adjust PIR Range/Sensitivity
Single Turn Day/Night Sensor Calibration POT: Adjust the light detection level of your Day/Night Sensor.
Version | Page 7 of 12 | Released |
TS P41.2 | This document comprises information provided by Suppliers and is |
|
| assumed to be correct. |
|
