Sony TTR1 manual f.Press the TUNE Knob to select Network Wizard

To connect to a wired network using the Network Wizard:

a.At the rear of the Radio, remove the compartment cover and connect an Ethernet cable to the Ethernet connector on the inside left of the compartment.. Refer to “Wired Ethernet Connector” on page 11 for the location of the Ethernet connector.. Replace the compartment cover..

b.Connect the other end of the Ethernet cable to your home’s wired network..

c.If you have turned your SIRIUSXM TTR1 Radio on for the first time, the SSID screen will already be displayed.. Skip ahead to step g..

d.Press MENU and turn the TUNE knob to highlight System Setup.. Press the TUNE Knob..

e.Turn the TUNE knob to highlight Network.. Press the TUNE Knob..

f.Press the TUNE Knob to select Network Wizard..

g.The Radio will scan for networks.. When the scan is complete, turn the TUNE knob to highlight [Wired] and press the TUNE knob..

h.If the Radio is able to connect to your network, the Connected screen will be displayed.. If Waiting for Ethernet

SSID

[Wired]

Some_Network_Name Other_Network_Name [Rescan]

[Manual config]

Connected

￿ Connected

21