Sony 412, TV Receiver quick start Shortly the picture will appear. Enjoy

3To set up an unencrypted wireless signal, select Open authentication A and No encryption B. Select Set C to save the changes. Then select the Back button D.1

A

B

C

D

Settings > Monitor > On the go - Wireless > Public Wireless Access > Connection Settings

4Select an SSID2 you want to connect to and select Connect.

5If the wireless signal is unencrypted, the Wireless signal quality level appears A and the

icon on the top bar B changes to . If the wireless signal quality level does not appear, make sure you entered the correct encryption code in step 3 (page 13) or go back to step 2 (page 12) and choose another SSID.

B

A

Settings > Monitor > On the go - Wireless > Public Wireless Access

6Try to connect to any website. Most hotspots requiring a login will automatically redirect you to the login page. Note that some hotspots may require a fee.

7Go to TV or Video and select NetAV to start!

A dialog box will show that you are Connecting, then > Authenticating > Buffering.

Shortly the picture will appear. Enjoy!

1Some commercial hotspots require an encryption code to log-on. If needed, enter the encryption code at this step. Also, note that some commercial hotspots require a fee for access.

2SSID stands for Service Set Identifier, a label that distinguishes one wireless LAN from another.

13