Sony TV Receiver Step Configure LocationFree TV for DDNS, A User ID, B Password, E Set button

Step 3

Configure LocationFree TV for DDNS

1Make sure your LocationFree TV is connected in the Home/Wireless mode.

2In the Settings menu, go to Base station > NetAV Settings > Dynamic DNS. Enter the following information in the appropriate field.

A User ID	Enter the Username you registered in DynDNS
B Password	Enter the Password you registered in DynDNS

CURL to update DNS information If your registered Host/Domain name is YourName.dnsalias.com, enter http://members.dyndns.org/nic/update?hostname= YourName.dnsalias.com

D URL to detect IP address	Enter http://checkip.dyndns.org:8245/
E Set button	Select the Set button

A

B

C

D

E

Settings > Base station > NetAV Settings > Dynamic DNS

3Select the Back button and again select Dynamic DNS. Check that the data is showing as entered. If the data has changed, repeat step 2 on this page. Then check the Current status field as follows:

		A
Success	Your Dynamic DNS is successfully configured. The system is automatically
	checking IP addresses currently assigned to your base station. Wait at least 10
	minutes before going to Step 4 on page 9.
Failure	The Dynamic DNS configuration failed or communication to the server failed.
	Try repeating Steps 1-3 on pages 5 to 8. The update process may take as long as
	10 minutes at the DDNS provider. Wait 10 minutes before trying again
Updating	The system is still trying to correctly configure. Try waiting a few more minutes;
	the current status will soon indicate “success” or “failure.” If the Current status
	field does not change, repeat Step 2 on page 6.

8