Setting up the unit
You must make certain settings before you can connect the unit to your telephone line. Choose the proper settings for your telephone signaling type. You also have to set the AREA CODE switches according to your area.
2
4
3
(1)Be sure that this unit is not connected to the
(2)Open the switch cover.
(3)Select the telephone signaling type with the TONE/P1 (PULSE10)/P2 (PULSE20) selector.
TONE: When your phone line has tone signaling.
PULSE10: When your phone line has pulse signaling.
PULSE20: Normally, this is not used. For details, see “To check the dial speed of a pulse dialing phone” on page 12.
zTips
•How can I tell if my phone has tone signaling?
You can hear the touch pad sound from your phone when you press the number button.
•How can I tell if my phone has pulse signaling?
You can hear clicking sounds from your phone when you press the number button.
(4)Set up the AREA CODE switches according to your area.
For details, see “The setup of the AREA CODE switches” on page 13.