Setting up the unit (continued)

(5)Close the cover.

The setting is completed.

Notes

•If the TONE/P1 (PULSE10)/P2 (PULSE20) selector is not set to the appropriate position, you cannot communicate with the camcorder.

•If you cannot check the dial speed of your pulse dialing phone, set the TONE/P1 (PULSE10)/P2 (PULSE20) selector to P1 (PULSE10).

•In some countries and areas, TONE/P1 (PULSE10)/P2 (PULSE20) setting is not required.

In such a country or area, the USB-PSTN modem adaptor communicates by the telecom protocol in that country or area, regardless of the TONE/ P1 (PULSE10)/P2 (PULSE20) setting.

To check the dial speed of a pulse dialing phone

You can change the dialing speeds of some pulse dial phones. To check the dial speed, switch the dial speed selector on the phone and check the clicking sound. The slower one is the normal setting. When you select the fast dial speed, set the TONE/P1 (PULSE10)/P2 (PULSE20) selector to P2 (PULSE20).

12-GB