Changes: Ver. 2.06 to Ver. 2.07

The following specifications have been added:

•Print Finishing Settings for the UP-DR100 and UP-D70A

You can now select the surface finish of prints output with a UP-DR100 or UP-D70A through a SCSI connection.

•Two Taxes

When calculating output service charges, you can now apply two tax rates.

•Printing File Names when Printing an Index

When printing an index you can select whether the selected images appear on the index with consecutive numbers or arranged by file names.

•Detailed Settings for Prescanning Film

When prescanning film, you can now make lookup table and frame detection interval settings. When the film manufacturer is not detected automatically, you can specify it from a list of manufacturers.

•Detailed Settings for Scanning Film

When scanning film, you can now make detailed color balance and density correction settings.

Applying Two Taxes

You can apply two taxes when calculating output service charges.

To set and modify the tax rates, open the [Setting – Menu – Price – Tax] screen of the Configuration Utility. For details about how to start and close the Configuration Utility, refer to the User's Guide.

Setting Print Finishing for the UP-DR100

and UP-D70A

When the UPA-PC100 is connected to a UP-DR100 or UP-D70A, you can change how the prints are finished.

In the Configuration Utility, open the [Setting – H/W – Printer – UP-DR100] or [Setting – H/W – Printer – UP-D70A] screen. For details about how to start and close the Configuration Utility, refer to the User's Guide.

When printing with the UP-DR100 or UP-D70A, touch the [Surface] button, and select [Glossy], or [Texture].

•[Tax1], [Tax2] buttons

Touch these buttons to set the taxes applied when calculating output service charges.

-[Tax Rate] button

Touch this button to set the tax rate of the selected tax. You can enter a tax rate between 0 and 100%.

-[Text strings] button

Touch this button to enter the name of the selected tax. The name that you enter here is displayed on the screen where you confirm charges. For details, refer to “Confirming Charges, Entering Passwords” Step 1 on pages 10 and 16, or “Confirm and output charges” Step 1, on page 23 of the User's Guide.

Printing File Names when Printing an

Index

When printing an index you can select whether the selected images appear on the index with consecutive numbers or arranged by file names.

In the Configuration Utility, open the [Setting – Menu – Print – Index] screen. For details about how to start and close the Configuration Utility, refer to the User's Guide.

When printing indexes, select the type of image title that you want to use. Touch the [File name] button, to switch between [ON] (images are arranged by file name) or [OFF] (images appear with consecutive numbers).

Note

If [File name] is [ON] when you scan film and then write to CD-R, the frame numbers displayed on the screen after prescanning appear on the index print. However, the images are arranged by consecutive numbers on the CD-R.

10