Sony UPX-C300 3, 5, 2, 4, To remove all images from the print queue, Setting up a Frame for Display During Printing

Press the ENTER button.

The Clear Queue screen appears.

Select OK by pressing the v control button.

To remove all images from the print queue

You can simultaneously remove all images from the print queue by performing the following steps.

1 Set the mode switch to .

2 Display the Playback menu.

For details on displaying the menu, see “Displaying the Playback Menu” on page 27.

3 Select CLEAR QUEUE by pressing the v or V control button.

4

5

6 Press the ENTER button.

All images are removed from the print queue.

Setting up a Frame for Display During Printing

The ID photo frame available for selection on the print preview screen can be set in the SETUP menu. Set the most frequently used frames to display so that you can select the desired frame easily.

3, 5, 72, 4, 6

1 Display the SETUP menu.

For details on displaying this menu, see “Displaying the SETUP Menu” on page 28.

2 Select ID PHOTO FRAME by pressing the v or V control button.

3 Press the ENTER button.

The ID PHOTO FRAME screen appears.

4 Select a frame to hide by pressing the v or V control button.

You can display the next page or return to a previous page by pressing the b or B control button.

5 Press the ENTER button.

The(check mark) for the selected frame appears, and the frame becomes available in the print preview screen.

If you press the ENTER button again, the(check mark) is removed, and the frame will not be available in the print preview screen.

Each press of the ENTER button removes or restores the mark.

If you select SELECT ALL and press the ENTER button, the mark appears for all of the ID photo frames.

If you select DESELECT ALL and press the ENTER button, the mark is removed for all of the ID photo frames.

Menu 37