Sony VAIO DIGITAL STUDIO manual My mouse does not work

VAIO Digital Studio Computer User Guide

3From the Audio tab, locate the Sound recording section and click the Volume button. The Recording Control dialog box appears.

4Select the Options menu and click Properties. The Properties dialog box appears.

5In the section, “Adjust volume for,” select the Recording option. Click OK.

6From the Recording Control dialog box, decrease the microphone volume level by moving the slider bar down.

7Close the Recording Control dialog box and then close the Sounds and Audio Devices Properties window.

My mouse does not work.

❑Check that the mouse is plugged securely into the Mouse port.

❑Save and close all open applications. Turn off your computer, wait approximately 10 seconds, and then restart your computer.

❑There may be dust or dirt inside the mouse mechanism. To clean the mouse, follow these steps:

1 Save and close all applications, and turn off your computer.

2 Turn the mouse upside down.

3 Remove the mouse ball cover on the back of the mouse by turning clockwise the ring that covers the mouse ball.

4 Turn the mouse upright, and drop the mouse ball into your hand.

5 Using a piece of tape, remove any dust or dirt on the mouse ball and inside the mouse ball socket.

6 Return the mouse ball to the socket, and replace the mouse ball cover. Secure the cover by turning the ring counter-clockwise.

✍You may need to reinstall the mouse drivers. See “To Use the Driver Recovery CD” for more information.

78