11 If the connection name is unnecessary to change, press on the remote control to proceed to the next step.

The confirmation screen for settings appears.

Hint

Normally it is unnecessary to change the connection name.

12 Confirm the setting, and press on the remote control to proceed to the next step.

13 Select [Yes] by pressing on the remote control, and press (ENTER).

Connection to the access point is confirmed. When connected properly, “Network connection completed” is displayed.

Setting Manually

If the access point device does not support AOSS, or AOSS does not work properly, set manually by the following steps.

1 Confirm the access point information.

Confirm the following information. For details on the access point device (wireless LAN router), see the operating instructions supplied with the access point device, or consult the access point provider.

SSID

Identification for the access point.

Security type

Security type depends on the access point. With this unit, [None], [WEP], [WPA-PSK (TKIP)], [WPA- PSK (AES)] can be selected.

Encryption key

WEP key or WPA key is required depending on the selected security type.

2 Display the screen below by following steps 1 to 5 in “Setting with AOSS” (page 51).

54