Condition

Cause/Remedy

 

 

is not displayed in a

 Photos uploaded to a Web service on the Internet take time to display

Shared frame.

on the unit. Wait for a while, then play back the frame.

 

 

The clock does not work

 Date and time may be reset if the unit is disconnected from the AC

properly in the Photos and Info

adapter. Set the date and time by [ Date and time settings] in

frame.

[ Settings].

 

 

News is not displayed in the

 The unit may not be properly connected to the network. See the

Photos and Info frame.

cause/remedy of “[Cannot show the item] is displayed.” in “Playing back

 

a frame” (page 66).

The same photo is displayed repeatedly in the Photos frame.

As a system restriction, the same photo may be displayed repeatedly immediately after starting the frame. This is not a malfunction.

Start timer does not work properly.

The start timer may be set to [Off.] Check the start timer setting.

The frame specified by the start timer may have been deleted. In this case, the start timer setting is reset to the factory default.

The start timer may not work if the Settings, Options or browse screen is displayed at the time the start timer is set.

Stop timer does not work properly.

The stop timer may be set to [Off.] Check the stop timer setting.

The stop timer may not work if the Settings, Options or browse screen is displayed at the time the stop timer is set.

Connecting to a Wireless Network

Condition

Cause/Remedy

 

 

[A connection error occurred]

 This unit is not connected to the network. Check the following.

is displayed.

 The WLAN ON/OFF switch is set to ON.

 

 The network setting is correct.

 

 All cables are connected securely.

 

 The connected device(s), such as the access point device (wireless

 

LAN router), is turned on.

 

 The cable type (straight or cross) is correct.

 

 The MAC address is required for network connection depending on

 

the access point setting. The MAC address can be checked in [System

 

information] of [ System settings] in [ Settings].

 

 The frequency bandwidth of the wireless network may not be

 

sufficient. Place the access point device or wireless adapter near this

 

unit without obstacles in-between.

 

 A device, such as a microwave, around this unit may cause interference,

 

and result in poor communication.

 

 

67