Sony VGF-CP1 Press on the remote control to proceed to the next step, Select [Yes] by pressing on the remote control, and press (ENTER)

Press on the remote control to proceed to the next step. The selection screen for address settings appears.

8

9 Select [Easy] by pressing on the remote control, and press to proceed to the next step.

The setting screen for the connection name appears.

Hint

Select [Custom] to manually set information, such as the IP address.

10 If it is unnecessary to change the connection name, press on the remote control to proceed to the next step.

The confirmation screen for settings appears.

Hint

Normally it is unnecessary to change the connection name.

11

12

Confirm the setting, and press on the remote control to proceed to the next step.

Select [Yes] by pressing on the remote control, and press (ENTER).

Connection to the access point is confirmed. When connected properly, “Network connection completed” is displayed.

56