When selecting [None], proceed to step 12.
Select the security type confirmed in step 1.
If selecting other than [None], the screen to enter the WEP key or WPA key appears.
The selection screen for the security type appears.
Press on the remote control to proceed to the next step.
5
6 Select the security type by pressing on the remote control, and press to proceed to the next step.
If several access points are displayed, select SSID of the access point in use.
3 Select [Search] by pressing on the remote control, and press 
(ENTER).A list of available access points is displayed.
4 Select an access point by pressing on the remote control, and press to proceed to the next step.
The confirmation screen for SSID appears.
Hint
Hint
7 Press 
(ENTER) on the remote control to display the software keyboard, enter the WEP key or WPA key, and press 
(ENTER).
Enter the password confirmed in step 1.
55