Closing the “VAIO Camera Capture Utility” software

Click , which is on the top right of the “VAIO Camera Capture Utility” screen.

Changing the camera setting

To adjust the brightness, Backlight compensation, etc., go to “Property” of “VGP-UVC100 device driver.”

In the “Property” screen, you can adjust the zoom or set up the frame.

To display the “Property” screen

Right-click the icon of the notification area, then click “Advanced Settings.”

zHint

If this camera’s software is not started, “Advanced Settings” is not activated.

x“Settings” screen

In the “Settings” screen, change the following setting items:

–Mirror (flip horizontal), Image Flip, Low Light and Backlight compensation.

zHint

“Low Light” is an effective function for capturing in low-light conditions. However, image artifacts might occur as a result of lighting correction. Capturing in sufficient light is always recommended.

–Brightness, Contrast, Gamma, Hue, Saturation and Sharpness

–Exposure and White Balance

12