11
Activating the Network Features
Preparation

BPreparation

Activating the Network Features
To use the network features of the projector,
a peer-to-peer connection between the
projector and a computer or a connection of
both devices over a network is required.
There are four types of Network Mode
(VPL-MX25: 3 and 4/VPL-DX15: 1 to
4). Use one of the methods according to
your network environment.
There are precautions on use of the network
features. See “Use of Network Features” on
page6 be fore you start using this feature.
• When you make a connection, a network
configuration such as an IP Address setting
may be required. For details, contact your
network administrator.
• If your network environmen t has changed,
set up the network configuration again.
Choose one of the four types of Network
Mode according to your network
environment.
Wired Connection (VPL-DX15 only)
1Connection between the projector
and a computer
Use a cross type Ethernet cable for the
connection.
For details on the connection and
configuration, see “Making a Wired
Connection with a Computer” on page 14.
Before starting
Notes

Network Mode

Projector
Computer