21
Configuring the Network Settings Using the Menu
Preparation
Input the Projector Name and set whether or
not to require input of a Password to operate
the Windows Vista® Network Projector
feature.
1Press the MENU key on the remote
commander to display the menu.
2Press the v/V/b/B key to select “To
Network Setting” in the Network
Setting menu then press the ENTER
key.
The Network Setting menu appears.
3Press the v or V key to select
“Common Setting” then press the
ENTER key.
The Common Setting menu appears.
4Enter the necessary items using the v/
V/b/B key and ENTER key.
The on-screen keyboard appears when
the menu prompts you to enter
characters and numerals, etc.
For the procedure for using the on-
screen keyboard, see “Using the On-
Screen Keyboard” on page23.
5Select “Close” then press the ENTER
key when all items are entered.
The Network Setting menu is restored,
and the entered settings are displayed.
6Press the MENU key to quit the
setting.
Configuring the Common
Setting Items
Select: Set: Exit:
Network Setting
IP Address Setting
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Auto (DHCP)
. . .
. . .
. . .
. . .
. . .
Common Setting
Wireless Network
Wired Network
SonyProj9980B8
Common Setting
Exit:
Select: Set:
Projector Password
Projector Name
Initialize Network Setting
Not required
Close