22 Initializing the Network Setting
Initializing the Network Setting
All the network settings that were
configured can be reset to the factory preset
values.
1Press the MENU key on the remote
commander to display the menu.
2Press the v/V/b/B key to select “To
Network Setting” in the Network
Setting menu then press the ENTER
key.
The Network Setting menu appears.
3Press the v or V key to select
“Common Setting” then press the
ENTER key.
The Common Setting menu appears.
4Press the v or V key to select
“Initialize Network Setting” then
press the ENTER key.
The Initialize Network Setting dialog
box appears.
5When you want to reset the settings,
press the b or B key to select “OK”
then press the ENTER key.
The dialog box to confirm the
initialization appears.
6Press the ENTER key.
All the settings for the network are
initialized, and the Common Setting
menu is restored.
7Select “Close” then press the ENTER
key.
The Network Setting menu is restored.
8Press the MENU key to quit this
setting.
Select: Set: Exit:
Network Setting
IP Address Setting
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Auto (DHCP)
. . .
. . .
. . .
. . .
. . .
Common Setting
Wireless Network
Wired Network
SonyProj9980B8
Common Setting
Exit:
Select: Set:
Projector Password
Projector Name
Initialize Network Setting
Not required
Close
Initialize Network Setting
Reset OK?
OK Cancel
Initialize Network Setting
Reset complete.
OK