36 Projecting a File Stored in the USB Memory Directly—USB File Viewer
BUsing USB File Viewer
Projecting a File Stored in the USB Memory Directly—USB File ViewerThere are precautions on use of USB File Viewer. See “Use of USB File Viewer” in “Precautions” on page 8 before you start using this feature.
1Press the USB key on the remote
commander.
The input signal setting is set to “USB.”
2Insert the USB memory into the
(USB) connector on the projector.
Files stored in the USB memory are displayed on the screen.
3Press the v or V key to select the file
you wish to project.
4Press the ENTER button.
The Viewer of the application that corresponds the file starts then it is projected on the screen.
5Operate the projector according to the
viewer of the activated application.
See “Using File Viewer” on page37.
Before starting
/
Name Update Size
Select: Set:
Name Order Up
Sorting Order
Upward
xxx
xxx
xxx
2009/02/10
xxx
xxx xxx
xxx xxx xxx
xxx xxx xxx
xxx xxx xxx
xxx xxx xxx
xxx xxx xxx
xxx xxx xxx
xxx xxx xxx
100KB
xxx
USB