24 VPL-EW130
4-3-3. PJLink
The following model is equipped with the PJLink class1 protocol.
For details about this protocol, refer to the PJLink specifi cations published from JBMIA.
You can turn on or off the PJLink protocol and set a password from the Web setting screen > “Advertis-
ment/PJ Talk/PJ Link” tab > PJLINK.
When the authentication setting is changed, the connected controller will be disconnected.
This protocol is set to OFF by default.
PJLink class1 corresponding model
VPL-SX125, VPL-SW125
1. Command Details
Command Data Remark
POWR 0 Changes the projector’s power status to ‘Standby’.
1 Changes the projector’s power status to ‘Lamp ON’.
POWR ? The following values are returned:
0 : Standby
1 : Lamp ON
2 : Cooling state
3 : Warm-up state
4 : Unacceptable period
5 : Projector defect
INPT 1*Changes the projector input to ‘RGB*’.
2*Changes the projector input to ‘VIDEO*’.
3*Changes the projector input to ‘DIGITAL*’.
4*Changes the projector input to ‘STORAGE*’.
5*Changes the projector input to ‘NETWORK*’.
INPT ? The following values are returned:
1*: RGB*
2*: VIDEO*
3*: DIGITAL*
4*: STORAGE*
5*: NETWORK*
AVMT 10 Cancels the projector’s video muting.
11 Sets the projector’s video muting.
20 Cancels the projector’s audio muting.
21 Sets the projector’s audio muting.
30 Cancels the projector’s video + audio muting.
31 Sets the projector’s video + audio muting.
AVMT ? The following values are returned:
11 : Projector video muting ON
21 : Projector audio muting ON
30 : Projector video + audio muting OFF
31 : Projector video + audio muting ON