WebCam settings
EN
Picture controls
3
4
5
6
7
8
9
0
!
3Full automatic control: on/off
This full automatic control mode provides a very easy way to get the best out of your Philips SPC210NC/SPC215NC WebCam. Or you can choose to have maximum manual control over the WebCam settings by switching the full automatic control mode off. Full automatic control 'on' is the preferred setting for normal use.
Techniques active within full automatic control mode are:
–Automatic exposure control and automatic white balance control, to provide the best video source signal possible;
–Automatic frame rate selection for improved WebCam sensitivity in low light conditions.
4Brightness
Brightness enables you to adjust the brightness of the displayed image or video to suit your own preference. Use the slider to find your preferred setting.
5Contrast
Contrast enables you to control the ratio between dark and light according to your own preference.
Use the slider to find your preferred setting.
13
