37
VPL-FX30
(4) [Input switch inquiry] INPT?
This command obtains the projector’s input status.
The projector responds examples as follows:
Returns the following values when the input status is obtained (The input channel varies depending
on the model.):
When the projector input is Video : Returns “21”.
When the projector input is S-Video : Returns “22”.
When the projector input is Input A : Returns “31”.
When the projector input is Input B : Returns “32”.
When the projector input is Input C : Returns “33”.
When the projector input is Input D : Returns “34”.
When the projector input is Input E : Returns “35”.
When the projector input is Input F : Returns “36”.
When the projector input is USB : Returns “41”.
When the projector input is Network : Returns “51”.
Unacceptable period (when the power status is other than Power ON) : Returns “ERR3”.
Projector error occurring (including warning) : Returns “ERR4”.
(5) [AV muting command] AVMT
This command sets the projector’s AV muting setting.
The available parameter examples are as follows:
Parameter 11 : Projector video muting ON
Parameter 10 : Projector video muting OFF
Parameter 21 : Projector audio muting ON
Parameter 20 : Projector audio muting OFF
Parameter 31 : Projector video + audio muting ON
Parameter 30 : Projector video + audio muting OFF
The projector responds as follows:
When processed properly : Returns “OK”.
When parameter is out of range : Returns “ERR2”.
Unacceptable period (when the power status is other than Power ON) : Returns “ERR3”.
Projector error occurring (including warning) : Returns “ERR4”.
(6) [AV muting status inquiry] AVMT?
This command obtains the projector’s AV muting status.
The projector responds as follows:
Returns the following values when the AV muting status is obtained:
When the projector video muting is ON : Returns “11”.
When the projector audio muting is ON : Returns “21”.
When the projector video + audio muting is ON : Returns “31”.
When the projector video + audio muting is OFF : Returns “30”.
Unacceptable period (when the power status is other than Power ON) : Returns “ERR3”.
Projector error occurring (including warning) : Returns “ERR4”.