3
VPL-FX30
2. Common Commands

2-1. Sub Commands

Sub Command is the value which is used by Simplifi ed Command. Value is assigned for executing func-
tion. For example, if you want to change the picture mode, the appropriate value assigned for the desired
picture mode should be chosen.

2-1-1. ITEM List

Item lists are described below. Tables are shown per function category.
VPL-FX30/FX35/F400X/F500X
ITEM List For Picture
<Table 1> <Table 2> Remarks
Item Number Data
Item Upper byte Lower byte Data Byte
PICTURE MODE 00h 02h DYNAMIC 0000h Set/Get
STANDARD 0001h
PRESENTATION 0002h
CONTRAST 00h 10h VALUE 0000h-0064h(0-100)
BRIGHTNESS 00h 11h VALUE 0000h-0064h(0-100)
COLOR 00h 12h VALUE 0000h-0064h(0-100)
HUE 00h 13h VALUE 0000h-0064h(0-100)
SHARPNESS 00h 14h VALUE 0000h-0064h(0-100)
EXT. OUTPUT VOLUME 00h 16h VALUE 0000h-0064h(0-100)
COLOR TEMP 00h 17h HIGH 0000h
MID 0001h
LOW 0002h
HIGH BRIGHTNESS 0003h
CUSTOM1 0004h
CUSTOM2 0005h
CUSTOM3 0006h
BLACK LEVEL ADJ 00h 1Ch OFF 0000h
LOW 0001h
HIGH 0002h
FILM MODE 00h 1Fh OFF 0000h
AUTO 0001h
GAMMA MODE 00h 22h TEXT 0000h
GRAPHIC 0001h