Synchronized recording

You can record videos on DVD+RW or DVD+R discs while playing them back on your video device.

Connect the video device to the drive using an AV cable, and the drive will start/stop recording automatically when you start/stop playback on the video device. In synchronized recording, the drive starts/stops recording when it detects signals from the video device.

Note

Synchronized recording may not operate properly or entirely in the following cases:

•The video device continues to output signals even after playback has stopped. For example, standard VCRs output signals from the built-in tuner after they stop playback of tapes, therefore, the drive keeps detecting signals and does not stop recording. To avoid this, set the VCR so that it does not output signals when it is not playing back tape, by switching the input selection to line-in, etc. This symptom will occur with some video cameras that output a video signal to make blue or plain back-screen. In this case, disable the signal for back-screen on your video cameras.

•The drive has detected a copy protection signal. Recording stops.

•Videos may not be recorded for a moment when recording has just started.

1 Connect a video device.

Refer also to the manual supplied with the device to be connected.

S video cable*

YellowYellow

WhiteWhite

RedRed

AV cable

Signal flow

* When the video camera or VCR has the S VIDEO jack.

14