Maximizing performance

Reaching the highest possible data transfer rate

Make sure that you use high-speed certified discs for which this operation has been guaranteed by Sony. For the latest information about these discs, visit the user support web site. When using discs other than those mentioned above, the drive may limit writing speed to preserve a good reading quality.

Updating the firmware

We recommend using the drive with the latest firmware as some problems encountered when using the drive can be solved simply by updating the drive firmware. Firmware updates are available on the user support web site. See page 45 for details.

Hint

The firmware is the built-in software that makes the drive work.

Using 48x read/write speed for CDs

The default read/write speed for CDs of this drive is 40× speed. With a single touch, you can make the read/write speed 48× speed.

Notes

•On rare occasions, some discs may not be able to tolerate 48× speed, causing them to break. We recommend that you do not use deeply scratched, brittle, or other discs that may break at 48× speed.

•This function does not guarantee a 48× write speed. Depending on the condition of the disc you are using, the speed may be lower.

•This function does not increase read/write speed with CD-RW discs.

1 Insert a disc into the drive.

The read/write speed when you insert a disc is normally 40× speed.

2 Press the Eject button for five seconds.

The busy indicator blinks twice and the read/write speed switches to 48× speed.

Hint

When you open the disc tray, the read/write speed reverts to its default of 40× speed.

DVD External an as Drive the Using

35