2Press Ï•REPEAT again to tag point B.

“A-B” will flash and the tape will be rewound to point A. Then “REP” display and the specified portion is played repeatedly.

To cancel the A-B Repeat playbackPress the jog lever on the remote control or Ï•REPEAT on the main unit.Notes

•You cannot specify a repeat portion to include both sides of the tape.

•You cannot specify a repeat portion of shorter than 2 seconds.

•After repeated operation, the actual portion that is played back may shift off somewhat from the exact portion specified with the tags due to tape slack.

•A-B Repeat will repeat 50 times before returning to normal playback if not canceled manually.

•Do not use the A-B Repeat function with tapes longer than 90 minutes. If you do, the tape may be damaged.

Recording

You can record radio programs from the built-in radio, or record with the supplied microphone. In either case, use a new or fully charged battery.

Note

•If the record-protect tab is broken, you cannot record on that side.

1 Insert a normal (TYPE I) tape.

To record on both sides Insert the cassette with the side to be first recorded on as the FWD (forward) side*.

*Make sure that “FWD” is displayed. If not, press and hold p•RADIO OFF until “REV” changes to “FWD”.

To record on one side only

Insert the cassette with the side to be recorded on as the REV (reverse) side**.

**Make sure that “REV” is displayed. If not, press and hold p•RADIO OFF until “FWD” changes to “REV”.

Note

•When the cassette holder is opened, the direction of the tape will be automatically set to “FWD”.

2 Select a recording source:

To record with the microphone Connect the supplied microphone to the MIC (PLUG IN POWER) jack.

To record from the radio Tune in to the station you want to record (see “Listening to the Radio”).

56