Area* | Frequency range | |
| FM (MHz) | AM (kHz) |
USA | ||
Eur | ||
Japan | ||
(AREA |
|
|
Using the Menu
Adjusting playback modesYou can adjust the following playback modes using the Menu function on the remote control or on the main unit.
AVLS: Turn on to limit the maximum volume to protect your hearing (Automatic Volume Limiter System) (on the main unit, “” indicates “on”).
a(PB MODE): Turn on to play both sides repeatedly (on the main unit, “a” indicates “on”).
Plays both sides once from the FWD side when turned off (on the main unit, “•” indicates “off”).
a(PB aNR): Turn on when you play back a tape recorded with the Dolby* B NR system (on the
main unit, “ ” indicates “on”).*Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
“DOLBY”and the
Notes
•The playback modes can be set or canceled separately.
•The playback modes cannot be adjusted while recording.
On the remote control
1Press MENU to enter the menu mode. “r” (the cursor) will flash in the display of the remote control.
2Jog the jog lever upward/ downward repeatedly until “r” flashes on the playback mode to be adjusted.
3Press the jog lever to enter. You will hear a short beep and “r” will appear for a few seconds. Then, the display will exit the menu mode.
61