On the main unit

1Press MENU repeatedly to move “__” in the display toSOUND.2Press SET repeatedly to select the sound emphasis of your choice.

Note

If the sound becomes distorted with the GRV effect, select MB or NORM (no message).

Notes on the menu mode

You cannot operate the tape from the remote control while you are in the menu mode.

When you press the jog lever to enter, or if you leave the remote control unoperated for more than

30 seconds, the display will exit the menu mode automatically. To exit the menu mode manually, press MENU again.

The menu setting (except for AVLS) is stored even after the battery is replaced.

Using Other

Functions

To lock the controls— Hold functionSlide HOLD switch in the direction of the arrow to lock the controls.To use the tape counter

The tape counter is displayed on the main unit during playback, recording, fast forward, rewind, and stop (except when the radio is turned on). The number will increase when playing back the FWD side, and decrease when playing back the REV side.

To reset the counter to “000”, pressENTER/COUNTER RESET.

Notes

The tape counter may show some deviation.

The tape counter will not be displayed when the cassette compartment is empty.

63