Appendix
Specifications
Image pickup device
| 1/2type interline transfer CCD |
Number of effective pixels | |
| |
| |
Cell size | |
| |
Chip size | |
| |
CCD horizontal driving frequency | |
| |
| |
CCD vertical driving frequency | |
| |
| |
Signal system | |
| |
Lens mount | |
Flange back | 17.526 mm (23/32 inches) |
| (light wavelength: 360 nm) |
Synchronization system | |
| Internal/External |
| (Selected automatically) |
External synchronization input/output | |
| HD/VD (2 to 5 |
| * Automatically selected according |
| to the existence of an input signal |
| when the selection switch on the |
| rear panel has been set to EXT. |
Allowable frequency deviation of external | |
| synchronization |
| ±1% (in horizontal synchronous |
| frequency) |
Jitter | Within ±50 nsec |
Scanning system |
|
Horizontal resolution
| |
| |
S/N ratio | 60 dB |
GAIN | AGC/Manual |
(Can be selected using the DIP switch on the rear panel)
Gamma compensation
ON/OFF
(Can be selected using the DIP switch on the rear panel)
Electronic shutter
External trigger shutter
switches on the rear panel.
Power requirement
DC +12 V (+9.0 V to 16 V) Power consumption
1.6W
Operating temperature
Performance assurance temperature
0 °C to +30 °C (32 °F to 86 °F) Operating humidity
20 to 80%
Storage humidity
20 to 95%
10 G
(For 20 minutes in the X,Y and Z directions at 20 to 200 Hz)
Shock resistance 70 G Outside dimensions
29 (W) ⋅ 29 (H) ⋅ 32 (D) mm (1 3/16 (W) ⋅ 1 3/16 (H) ⋅ 1 5/16 (D) inches)
21