Sony XCD-SX910CR, XCD-SX710CR, XCD-SX910UV, XCD-SX910, XCD-SX710, XCD-SX910CR, XCD-X710CR, XCD-SX910UV, XCD-SX910, XCD-SX710 manual 17

Control

	Offset	0-7	8-15	16-23		24-31
Unit	444h	0003			CRC
Dependent	448h	40	3C	00		00	CommandRegsBase
Info	44ch	81	00	00		02	VendorNameLeaf
	450h	82	00	00		05	ModelNameLeaf

For offset address 444h, the length of the UnitDependentInfo is 3 Quadlets.

CommandRegsBase is the base address of the camera control register.

F0000000h + 3c0000h * 4 = F0F00000h

VendorNameLeaf

The offset address of VendorNameLeaf is required to be

44Ch + 000002h * 4 = 454h

The offset address of ModelNameLeaf is required to be

450h + 000005h * 4 = 464h

	Offset	0-7	8-15	16-23		24-31
Vendor	454h	0003			CRC
Name	448h	00	00	00		00
Leaf	44ch	00	00	00		00
	450h	53	4F	4E		59	“SONY”

For offset address 454h, the length of the VendorNameLeaf is 3 Quadlets. The subsequent 8 bytes are fixed at 00. After that, the four characters for “SONY” are entered.

ModelNameLeaf

	Offset	0-7	8-15	16-23			24-31
Model	464h	0006			CRC
Name	468h	00	00	00		00
Leaf	46ch	00	00	00		00
	470h	58	43	44			2D	“XCD-”
	474h	53	58	39		31		“SX91”
	478h	30	20	76		31		“0 v1”
	47Ch	2E	30	30		41		“.00A”

For offset address 464h, the length of the ModelNameLeaf is 6 Quadlets. The subsequent 8 bytes are fixed at 00.

For the XCD-SX910CR/SX910UV/SX910, the 16 characters “XCD-SX910 v1.00A” come next. For the XCD-X710CR/X710, the15 characters are “XCD- X710 v1.00A”.

Model names are subject to change with the upgrade of firmwares.

XCD-SX910CR/X710CR
XCD-SX910UV	17
XCD-SX910/X710