Timer and sleep operation (Remote control only)
Once timer:
Once timer play works for one time only at a preset time.
Daily timer:
Daily timer play works at the same preset time every day. For example, set the timer as a
Using the once timer and daily timer in combination: For example, use the once timer to listen a radio program, and use the daily timer to wake up.
1 minute or more
Daily timer 
Once timer
Start | Stop | Start | Stop |
Timer playback
Before setting timer:
●Check that the clock is set to the correct time (refer to page 10). If it is not set, you cannot use the timer function.
●For timer playback: Plug in USB or load disc or dock iPod to be played.
1Press the
2Press and hold the CLOCK/TIMER button.
3Within 10 seconds, press the 
or 
button to select “ONCE SET” or “DAILY SET”, and press the MEMORY button. Set the clock to the correct time if “ONCE SET” or “DAILY SET” does not appear.
4Within 10 seconds, press the 
or 
button to select “TIMER SET”, and press the MEMORY button.
5To adjust the hour, press the 
or 
button and then press the MEMORY button.
6To adjust the minutes, press the 
or 
button and then press the MEMORY button.
7Set the time to finish as in steps 5 and 6 above.
8To select the timer playback source (CD, TUNER, USB,
iPod or AUDIO IN), press the 
or 
button. Press the MEMORY button.
When you select the tuner, select a station by pressing
the 
or 
button, and then press the MEMORY button. If a station has not been programmed, “NO PRESET” will be displayed and timer setting will be canceled.
9Adjust the volume using the VOLUME control, and then press the MEMORY button. Do not turn the volume up too high.
10Press the
11 When the preset time is reached, playback will start. The volume will increase gradually until it reaches the preset volume. The “
” indicator will blink during timer playback.
The “DAILY” indicator will blink during timer playback.
