System connections
Make sure to unplug the AC power cord before making any connections.
Right speaker
AM loop antenna
Installing the AM loop
antenna
< Assembling >
<Attaching to the wall >
wall screws (not supplied)
Video cable | TV |
(not supplied) |
To video input jack
Left speaker
Red |
|
Black |
|
FM |
|
antenna | AC outlet |
| (AC 120 V ~ 60 Hz) |
Precautions
●Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 4" (10 cm) of free space along the sides, top and back of the equipment.
4" (10 cm) | 4" (10 cm) | 4" (10 cm) |
|
| 4" (10 cm) |
Speaker connection
●Connect the black wire to the minus
terminal, and the red wire to the plus
(+) terminal.
● Use speakers with an impedance of 4 ohms or more, as lower impedance speakers can damage the unit.
●Do not make a mistake when
connecting the right and left speakers. |
|
The right speaker is the one on the | Incorrect |
right side when you face the unit. |
|
●Do not let the bare speaker wires touch each other.
●Do not allow any objects to fall into or to be placed in the bass reflex ducts.
●Do not stand or sit on the speakers. You may be injured.
Remote control
Battery installation
Use 2 “AAA” size batteries
1Open the battery cover.
2Insert the batteries according to the direction indicated in the battery compartment.
When inserting or removing the batteries, push them toward the
3Close the cover.
Caution:
●Replace all old batteries with new ones at the same time.
●Do not mix old and new batteries.
●Remove the batteries if the unit will not be used for a long period of time. This will prevent potential damage due to battery leakage.
●Do not use rechargeable batteries
●Installing the batteries incorrectly may cause the unit to malfunction.
●Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Notes concerning use:
●Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 “AAA” size batteries
●Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth.
●Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit if this occurs.
●Keep the remote control away from moisture, heat, shock, and vibrations.
