Sony XP-SR320 N 1,3, Program Play → N, Repeat play, To stop program play, To erase the program

PLAY MODE

N 1,3	STOP/OFF
	CHARGE

25

1 ENTER/DISP

2

3 ENTER/DISP

5 PLAY/PAUSE

XP-SR321/SR320(AU)E2

Repeat play M

Press PLAY MODE during playback to select repeat play as follows.

: one-track repeat B

V

: all-track repeat

V

no repeat play (normal play)

Note

When the unit is set to E•A•S•S-12 or -48 second mode, if PLAY MODE is pressed at the end of the track to select the other play mode, the unit may not change to the other mode properly.

PROGRAM PLAY → N

Up to 24 tracks can be chosen for program play.

1Press ENTER/DISP while in standby mode to display “P-01”.

2Select the desired track by pressing r and t. a track number

b program number

3Press ENTER/DISP within 8 seconds.

If it is not pressed within 8 seconds, the track number changes to 00. Repeat the procedure from step 2 again.

4Repeat steps 2 and 3 to program more tracks.

5Press ePLAY/PAUSE to start program play.

To stop program play

Press sSTOP/OFF/CHARGE.

To add tracks to the program

Repeat steps 2 and 3 before you proceed to step 5. You can add tracks to the end of the program.

To erase the program

Press sSTOP/OFF/CHARGE while in standby mode.

To check the programmed tracks

Press ENTER/DISP repeatedly before you proceed to step 5.

The number of each programmed track will be displayed in order of playback.

Note

•The program is also erased when the disc compartment is opened or the auto power off function turns the power off.

•When 24 tracks are programmed, “P-FULL” appears, and no more tracks may be added.

•You cannot back to the previous track by holding rpressed during program play.

•Repeat play and random play can be performed during program play.